My Crawler :(
4 posters
OKRCRC :: Classifieds :: For Sale
Page 1 of 2
Page 1 of 2 • 1, 2
My Crawler :(
My back and knees have been giving me fits so I am not going to be crawling around on the rocks for some time. Between that and not having a job at the moment (I quit and then Jen was laid off so we are both out at the moment) my wallet is starting to hurt. Unfortunately I will have to put my crawler up for sell and let it go. I would rather it go to a good home here but if you guys don't want it then I am going to stick it out on RCC and/or RC Universe.
Here is what it is running at the moment.
Slingshot SE Chassis (modified to allow full size servo for dig)
CC Mamba Max ESC
CC BEC
Holmes Hobbies Cobalt 7T Puller motor
Z9100T steering servo
Vanquish Revolver 2.2 wheels
New Losi Comp Claws tires (ran in one comp for 3.5 courses)
8# Rockhammer Hybrid Reach (rear)
5# Rockhammer Hybrid Reach (Front)
Losi 4 inch shocks with 50 W oil in front and 70 W in rear
DNA dig (might need replaced)
MIP front and rear drive shafts (short one in rear for dig)
JR 126MG (dead) dig servo
aluminum knuckles and C-Hub's
Strait rear axles
aluminum adaptors
RC4WD TracGear Spool Locker + Bevel Shaft
Spektrum SR3000Rx
Spektrum DX3.0 TX
Maxamps 3 cell 800 MAH LIPO X3
Maxamps # cell 2000 MAH LIPO
Grappler Body
I think that is everything. It is about $1500 (if it were all new) as it sits (not including shipping cost) right now. For anybody that remembers I was running the Traxxis High current connectors on my batteries. I have since converted everything over to deans plugs. I would like to get $1200 from it but please make an offer. I need the money so I am willing to talk about any reasonable offer.
(These were taken prior to the Losi Comp Claws came in)
Warthog Pro Comp tube chassis (only Chassis, body panels, and carbon fiber lower chassis)
$150
TCS Aluminum Boomerang upper link mount (5.99)
Will take $5.00
Integy 45T motor (20.99)
Will take $10
CC Sidewinder ESC (76.45)
Will take $50
I will look around and see what else I have that I can put up for sell. Make an offer on anything Willing to talk about price and who pays shipping. I might make the trip to deliver it depending on where you live at.
Here is what it is running at the moment.
Slingshot SE Chassis (modified to allow full size servo for dig)
CC Mamba Max ESC
CC BEC
Holmes Hobbies Cobalt 7T Puller motor
Z9100T steering servo
Vanquish Revolver 2.2 wheels
New Losi Comp Claws tires (ran in one comp for 3.5 courses)
8# Rockhammer Hybrid Reach (rear)
5# Rockhammer Hybrid Reach (Front)
Losi 4 inch shocks with 50 W oil in front and 70 W in rear
DNA dig (might need replaced)
MIP front and rear drive shafts (short one in rear for dig)
JR 126MG (dead) dig servo
aluminum knuckles and C-Hub's
Strait rear axles
aluminum adaptors
RC4WD TracGear Spool Locker + Bevel Shaft
Spektrum SR3000Rx
Spektrum DX3.0 TX
Maxamps 3 cell 800 MAH LIPO X3
Maxamps # cell 2000 MAH LIPO
Grappler Body
I think that is everything. It is about $1500 (if it were all new) as it sits (not including shipping cost) right now. For anybody that remembers I was running the Traxxis High current connectors on my batteries. I have since converted everything over to deans plugs. I would like to get $1200 from it but please make an offer. I need the money so I am willing to talk about any reasonable offer.
(These were taken prior to the Losi Comp Claws came in)
Warthog Pro Comp tube chassis (only Chassis, body panels, and carbon fiber lower chassis)
$150
TCS Aluminum Boomerang upper link mount (5.99)
Will take $5.00
Integy 45T motor (20.99)
Will take $10
CC Sidewinder ESC (76.45)
Will take $50
I will look around and see what else I have that I can put up for sell. Make an offer on anything Willing to talk about price and who pays shipping. I might make the trip to deliver it depending on where you live at.
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
Re: My Crawler :(
Sad to see it go Greg...... we've all seen it grow up over the past year and half from stock with the Elcamino body to this gem....
procraft98- OKRCRC Member
- Number of posts : 133
Age : 44
Location : Broken Arrow, OK
Registration date : 2009-02-22
Re: My Crawler :(
I know I love this thing but I just can't keep tearing my back up like this and then there is that I don't have a job issue. I am fighting with the VA right now to see if I can get 100% disability because of my back. I just hope the truck can go to a good home and live a long happy life on a nice farm with all sorts of other crawlers to play with.
Here is that old ElkySS body. I still have it. I will put it back on something one day. maybe my Rustler. lol
Here is that old ElkySS body. I still have it. I will put it back on something one day. maybe my Rustler. lol
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
Re: My Crawler :(
OK well here is what I have now. I pulled the crawler apart and am posting it part by part... I also have it posted at rcc and rcu.... Pictures are cropped and I am to lazy to fix it... lol
Prices are not set in stone. I am willing to entertain any fair offer.
CC Mamba Max with CCBEC attached.
$125 [$158 + shipping new] Sold
VP Revolver 2.2 with Losi Comp Claws (#8 rockhammer Hybrid reach in front and #5 rockhammer hybrid reach in rear) Revolvers have air vents on inside and ran in 3 comps (like new) comes with full set of weights for front and rear. Comp Claws have been ran for a total of 10 minutes in one comp and are like new as well.
$175 [$240 + shipping new] Sold
Losi 4" shocks (filled and ready to go)
$40 [$58 + shipping new]
Thunder Tech Racing/MIP C-Drive Spline Pair for AX10 with Dig
$40 [$55 + Shipping new] Sold
JR 9100T Digital Ultra Tourqe Servo (370 oz/in @ 6V)
$90 [$130 + shipping new] Sold
AX10 built axles - include Aluminum C's and knuckles, strait axles, strait axle adaptors, and RC4WD spool lockers in each.
$100 Pair[$185 +shipping new]
DNA Slingshot chassis (only ran in 3 comps)
$80 [$129 +shipping new] Sold
AX10 Trans with holmes hobbies 7T Puller motor and DNA Dig
$130 [$145 + Shipping new] Sold
HBZ ProComp chassis (stock body panels will ship with it)
$175 [$219 + shipping new]
Integy Matrix Pro Lathe Motor 55T Single (in in just a handful of comps)
$10 [$20 + shipping new]
Castle Creations Sidewinder with Castle Link cable
$75 [$98 + shipping new]
Servo City Servo Stretcher (must have if you don't have EPA in your radio and want to use dig) http://www.servocity.com/html/180o_servo_stretcher.html
$10 [$20 + shipping new] Sold
Cash is always good, but I am looking for a DX6I or DX7 style (2.4GHz with model memory) Tx and Rx combo. If you would like to trade let me know and I am sure we could work something out.
Buyer pays shipping
PM me with any questions!
Thanks for looking!
Pay Pal Please.
Prices are not set in stone. I am willing to entertain any fair offer.
CC Mamba Max with CCBEC attached.
$125 [$158 + shipping new] Sold
VP Revolver 2.2 with Losi Comp Claws (#8 rockhammer Hybrid reach in front and #5 rockhammer hybrid reach in rear) Revolvers have air vents on inside and ran in 3 comps (like new) comes with full set of weights for front and rear. Comp Claws have been ran for a total of 10 minutes in one comp and are like new as well.
$175 [$240 + shipping new] Sold
Losi 4" shocks (filled and ready to go)
$40 [$58 + shipping new]
Thunder Tech Racing/MIP C-Drive Spline Pair for AX10 with Dig
$40 [$55 + Shipping new] Sold
JR 9100T Digital Ultra Tourqe Servo (370 oz/in @ 6V)
$90 [$130 + shipping new] Sold
AX10 built axles - include Aluminum C's and knuckles, strait axles, strait axle adaptors, and RC4WD spool lockers in each.
$100 Pair[$185 +shipping new]
DNA Slingshot chassis (only ran in 3 comps)
$80 [$129 +shipping new] Sold
AX10 Trans with holmes hobbies 7T Puller motor and DNA Dig
$130 [$145 + Shipping new] Sold
HBZ ProComp chassis (stock body panels will ship with it)
$175 [$219 + shipping new]
Integy Matrix Pro Lathe Motor 55T Single (in in just a handful of comps)
$10 [$20 + shipping new]
Castle Creations Sidewinder with Castle Link cable
$75 [$98 + shipping new]
Servo City Servo Stretcher (must have if you don't have EPA in your radio and want to use dig) http://www.servocity.com/html/180o_servo_stretcher.html
$10 [$20 + shipping new] Sold
Cash is always good, but I am looking for a DX6I or DX7 style (2.4GHz with model memory) Tx and Rx combo. If you would like to trade let me know and I am sure we could work something out.
Buyer pays shipping
PM me with any questions!
Thanks for looking!
Pay Pal Please.
Last edited by ElkySS on Fri Aug 28, 2009 5:12 pm; edited 3 times in total
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
Re: My Crawler :(
whats do you want for the wheels and servo? I don't need the tires
CD13- Admin
- Number of posts : 310
Age : 50
Location : OKC
Registration date : 2008-07-02
Re: My Crawler :(
I hate to tear them apart because I would have a hard time selling the tires alone. If somebody wants the tires I will pull that off of the price of the rims and ship them to you. They were only used for a bit in the one comp we had up here by Tulsa. So they are still really new.
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
Re: My Crawler :(
let me know,I found some for 110.00 but I would rather help you out and might be willing to buy the esc and bec
CD13- Admin
- Number of posts : 310
Age : 50
Location : OKC
Registration date : 2008-07-02
Re: My Crawler :(
Willing to do 350 for the ESC, bec, servo, and wheels? I will just hang on to the tires and do something with them.
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
Re: My Crawler :(
Did you sorta quote yourself because it is to much money? If it is make me an offer.
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
Re: My Crawler :(
No,That was an aww sh1t.I'm not that interested in the sidewinder.I'll give ya 200.00 for wheels and servo.I'll buy shipping so hows 210.00
CD13- Admin
- Number of posts : 310
Age : 50
Location : OKC
Registration date : 2008-07-02
Re: My Crawler :(
Ahhh I thought you ment the mamba max. My bad. If that is all you need then I guess I will pull the tires off. Let me work on my paypal thing. Does not seem to be wanting to accept payments right now.
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
Re: My Crawler :(
OK I think I have the paypal thing figured out. I had it set up as a personal account. Just upgraded to a premier. it should work now. elkyss1979@gmail.com should work for the paypal stuff. I will ship as soon as I can. any preferred shipping method? cheep or fast?
Last edited by ElkySS on Wed Aug 26, 2009 11:00 pm; edited 1 time in total
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
Re: My Crawler :(
Damn Greg, I personally hate to see you go Hopefully everything turns around for you and the misses soon.
DARKHORSE- OKRCRC
- Number of posts : 609
Age : 48
Location : Oklahoma City
Registration date : 2008-06-25
Re: My Crawler :(
I am sure that it will. I hope the VA will take care of my back and knee issues. I just got a denial letter in from them saying that there was not enough evidence to call it service connected. so I am working with the local VFW to appeal the decision and work on making me unemployable. I just really want them to take care of it and make it stop hurting so much. I could not feel my legs when I woke up a few days ago. That is a scary thing to wake up to. Took me 15 minutes to get out of bed. My old Chiropractor wrote me up a huge statement basically saying that my back is a direct result of my knees (which they already cover at 50%) therefor it is service connected. Between that and the VFW getting all of my military medical records (which will show a back injury that landed me in the doc office and on all kinds of pain killers) I don't think it will get declined again. but only time will tell. right now I am just trying to make rent and bills with no job.... lol
OK enough venting and feeling sorry for myself. looks like I am still having issues with my paypal account. I upgraded it to a Premier account but it still will not take payments. anybody know why?
OK enough venting and feeling sorry for myself. looks like I am still having issues with my paypal account. I upgraded it to a Premier account but it still will not take payments. anybody know why?
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
Re: My Crawler :(
OMG I hate paypal.... I think it is just because I don't understand it. Once again I think it works. I set up a dummy account and sent money to myself and it worked fine. I used my elkyss1979@gmail.com email address to send the money and it worked fine. Use that one CD because I know it is working.
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
Re: My Crawler :(
Doesn't like that email addy
CD13- Admin
- Number of posts : 310
Age : 50
Location : OKC
Registration date : 2008-07-02
Re: My Crawler :(
What in the world. It worked for me last night. Can you try Greg.crumbliss@gmail.com I set up a dummy paypal and it worked for me.
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
Re: My Crawler :(
When I log into the account I set up yesterday, I go to send Monet and put in elkyss1979@gmail.com and it works for me. I just sent and refunded again.
Not sure why it won't let other people.
Sent to:
Greg Crumbliss
Email:
greg.crumbliss@gmail.com
Payment Sent to:
elkyss1979@gmail.com
Amount sent:
-$1.00 USD
Fee amount:
$0.00 USD
Net amount:
-$1.00 USD
Date:
Aug. 27, 2009
Time:
10:19:22 PDT
Status:
Completed
Not sure why it won't let other people.
Sent to:
Greg Crumbliss
Email:
greg.crumbliss@gmail.com
Payment Sent to:
elkyss1979@gmail.com
Amount sent:
-$1.00 USD
Fee amount:
$0.00 USD
Net amount:
-$1.00 USD
Date:
Aug. 27, 2009
Time:
10:19:22 PDT
Status:
Completed
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
Re: My Crawler :(
[img][/img]
Tis is what I get
Tis is what I get
CD13- Admin
- Number of posts : 310
Age : 50
Location : OKC
Registration date : 2008-07-02
Re: My Crawler :(
OK it is an issue on Paypals end not mine. I just sent a request so I am marking them as sold. I think I also have a buyer for the chassis, motor combo, drive shafts, and Mamba. I would rather sell it to one of you if you want it but if not then I will reply to him soon.
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
Re: My Crawler :(
Well here is what I have left. If you like it make me an offer. nothing is set in stone. Otherwise I may just take it and make something for the kids to tear up. lol
Castle Creations Sidewinder with Castle Link cable
$75
Integy Matrix Pro Lathe Motor 55T Single (in in just a handful of comps)
$10
HBZ ProComp chassis (stock body panels will ship with it)
$175
AX10 built axles - include Aluminum C's and knuckles, strait axles, strait axle adaptors, and RC4WD spool lockers in each.
$100 Pair
Losi 4" shocks (filled and ready to go)
$40
Castle Creations Sidewinder with Castle Link cable
$75
Integy Matrix Pro Lathe Motor 55T Single (in in just a handful of comps)
$10
HBZ ProComp chassis (stock body panels will ship with it)
$175
AX10 built axles - include Aluminum C's and knuckles, strait axles, strait axle adaptors, and RC4WD spool lockers in each.
$100 Pair
Losi 4" shocks (filled and ready to go)
$40
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
Re: My Crawler :(
Ill take the 55t?
DARKHORSE- OKRCRC
- Number of posts : 609
Age : 48
Location : Oklahoma City
Registration date : 2008-06-25
Re: My Crawler :(
Kewl. Do you live near cd? If so I can just stick it in his box.
Btw CD I couldn't make it to the post office in time today. I got there about 5 minutes after they closed. Sorry. I will get it out as soon as I can. There is one that is open here on sat (I think) but no pick up till Monday if I remember right.
Btw CD I couldn't make it to the post office in time today. I got there about 5 minutes after they closed. Sorry. I will get it out as soon as I can. There is one that is open here on sat (I think) but no pick up till Monday if I remember right.
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
Re: My Crawler :(
I live about 20 minutes away, But yeah if its ok with Charlie?
DARKHORSE- OKRCRC
- Number of posts : 609
Age : 48
Location : Oklahoma City
Registration date : 2008-06-25
Re: My Crawler :(
That's a long way. I will just ship it on it's own. Coat you more in gas at these prices. Lol.
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
Page 1 of 2 • 1, 2
Similar topics
» 1.9 Crawler in Training
» venom crawler
» Losi 1/10 Crawler
» Warthog 2.2 Comp Crawler
» Bought a Mini-Crawler
» venom crawler
» Losi 1/10 Crawler
» Warthog 2.2 Comp Crawler
» Bought a Mini-Crawler
OKRCRC :: Classifieds :: For Sale
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Mon Jan 21, 2013 11:11 pm by chad30w
» Okrcrc 2013 comp# 1 Disney Oklahoma
Mon Jan 21, 2013 11:11 pm by chad30w
» scale comp class
Fri Jun 29, 2012 8:46 pm by Gdirtbike
» 2012 Season
Fri Jun 29, 2012 8:42 pm by Gdirtbike
» Okrcrc Comp #5 of 2012
Mon May 14, 2012 6:38 pm by chad30w
» Okrcrc Comp#4 Disney ok
Sat May 12, 2012 10:53 pm by OKJeepin
» Happy Mother's DAY
Sat May 12, 2012 10:32 pm by OKJeepin
» The Sons Comp Truck
Fri Apr 06, 2012 3:11 pm by backroads
» Romanose State Park
Mon Mar 26, 2012 7:07 pm by backroads