My Axial AX-10 Kit Build Thread
+3
jbrentd
DARKHORSE
w0ace
7 posters
Page 1 of 2 • 1, 2 
My Axial AX-10 Kit Build Thread
by w0ace Tue Aug 26, 2008 9:20 pm
Since I don't have all the upgrade parts for my kit build I decided to paint the body while waiting. I never have painted before, so this about drove me nuts! It came out ok I guess. It'll work for now. Here are some pictures:
Now if only I had parts!!!!!!!!!!!
Now if only I had parts!!!!!!!!!!!
w0ace- OKRCRC Member
-
Number of posts : 53
Age : 50
Location : Tulsa, OK
Registration date : 2008-08-13
Re: My Axial AX-10 Kit Build Thread
by DARKHORSE Tue Aug 26, 2008 10:02 pm
The body looks good, But I would ditch that heavy rock grabbing body and get something that looks like its been on a severe diet if you know what I mean...
DARKHORSE- OKRCRC
- Number of posts : 609
Age : 48
Location : Oklahoma City
Registration date : 2008-06-25
Re: My Axial AX-10 Kit Build Thread
by Guest Wed Aug 27, 2008 6:48 am
I like the hands free roch clip you got there, Body looks good.
Guest- Guest
Re: My Axial AX-10 Kit Build Thread
by w0ace Wed Aug 27, 2008 8:00 am
What the? My pictures are all cut in half? I had the full picture last night when I posted them???? When I viewed it after posting they were full size also? What happened?
w0ace- OKRCRC Member
- Number of posts : 53
Age : 50
Location : Tulsa, OK
Registration date : 2008-08-13
Re: My Axial AX-10 Kit Build Thread
by jbrentd Wed Aug 27, 2008 9:08 am
They look full size to me. Like Darkhorse said, you'll probably want a smaller body down the road. Nice paint job.
jbrentd- OKRCRC Member
- Number of posts : 63
Age : 50
Location : Owasso
Registration date : 2008-07-02
Re: My Axial AX-10 Kit Build Thread
by Guest Wed Aug 27, 2008 2:16 pm
Are you sure, I think it has something to do with that hands free roch clip you got.w0ace wrote:What the? My pictures are all cut in half? I had the full picture last night when I posted them???? When I viewed it after posting they were full size also? What happened?
Guest- Guest
Re: My Axial AX-10 Kit Build Thread
by Shaun Wed Aug 27, 2008 2:28 pm
They aren't cut in half on my screen.
Shaun- Admin
- Number of posts : 603
Age : 31
Location : Broken Arrow, OK
Registration date : 2008-06-23 -
Re: My Axial AX-10 Kit Build Thread
by w0ace Wed Aug 27, 2008 5:33 pm
ROCKEDUP RICKY wrote:Are you sure, I think it has something to do with that hands free roch clip you got.w0ace wrote:What the? My pictures are all cut in half? I had the full picture last night when I posted them???? When I viewed it after posting they were full size also? What happened?
Well at work I only see half the body in the shots, the rest is off the side of the screen in the shots. But here on my laptop they are full size and you see the full body in all the shots. ?????? Laptop screen is even smaller than the one at work, so?
w0ace- OKRCRC Member
- Number of posts : 53
Age : 50
Location : Tulsa, OK
Registration date : 2008-08-13
Re: My Axial AX-10 Kit Build Thread
by DARKHORSE Wed Aug 27, 2008 9:23 pm
Are you sure, I think it has something to do with that hands free roch clip you got.ROCKEDUP RICKY wrote:
[/quote]What the hell does a damn ROACH clip have to do with this?
DONT DO DRUGS
DARKHORSE- OKRCRC
- Number of posts : 609
Age : 48
Location : Oklahoma City
Registration date : 2008-06-25
Re: My Axial AX-10 Kit Build Thread
by DARKHORSE Thu Aug 28, 2008 3:06 pm
ROCKEDUP RICKY wrote:Sorry, I'll but out
No, HANG OUT WITH YOUR WANG OUT!!!!
DARKHORSE- OKRCRC
- Number of posts : 609
Age : 48
Location : Oklahoma City
Registration date : 2008-06-25
Re: My Axial AX-10 Kit Build Thread
by w0ace Mon Sep 01, 2008 3:37 pm
OK guys here is some of the upgrades I have on the way for the build 
Traxxas Gear Set 2070 & 2075 Servos(stripped out my Slash servo!)
Novak Rooster Crawler Brushed ESC
Novak Fifty-Five Crawler Brushed Motor
Axial Straight Axle 6x104 50mm(rear)
Axial Plastic Rear Axle Lockout (rear)
Axial HD Bevel Gear 38T Scorpion(both axels)
Axial Threaded Aluminum Pipe 6x101mm Scorpion(30* bent links)
Axial Heavy Duty Differential Locker(both axels)
Axial Driveshaft Rings Green(front shaft only)
Cheapbatterypacks 7 cell 1500 axel pack
Axial Universal Joint Set(front)
I have been reading/looking for all the info I can find about TCS Edge tuber. I am thinking that is going to be the next step.
Anyone running the Edge
Long weekend WITHOUT parts
Guess this week is going to be busy building as soon as parts show up. Maybe have 1 week of drive time before the comp 
That should be entertaining for everyone else to watch 
Traxxas Gear Set 2070 & 2075 Servos(stripped out my Slash servo!)
Novak Rooster Crawler Brushed ESC
Novak Fifty-Five Crawler Brushed Motor
Axial Straight Axle 6x104 50mm(rear)
Axial Plastic Rear Axle Lockout (rear)
Axial HD Bevel Gear 38T Scorpion(both axels)
Axial Threaded Aluminum Pipe 6x101mm Scorpion(30* bent links)
Axial Heavy Duty Differential Locker(both axels)
Axial Driveshaft Rings Green(front shaft only)
Cheapbatterypacks 7 cell 1500 axel pack
Axial Universal Joint Set(front)
I have been reading/looking for all the info I can find about TCS Edge tuber. I am thinking that is going to be the next step.
Anyone running the Edge
Long weekend WITHOUT parts
Guess this week is going to be busy building as soon as parts show up. Maybe have 1 week of drive time before the comp That should be entertaining for everyone else to watch
w0ace- OKRCRC Member
- Number of posts : 53
Age : 50
Location : Tulsa, OK
Registration date : 2008-08-13
Re: My Axial AX-10 Kit Build Thread
by DARKHORSE Mon Sep 01, 2008 4:31 pm
Chad30w has an edge chassis comp rig..
Sounds like your gonna be busy building
Sounds like your gonna be busy building
DARKHORSE- OKRCRC
- Number of posts : 609
Age : 48
Location : Oklahoma City
Registration date : 2008-06-25
Re: My Axial AX-10 Kit Build Thread
by ElkySS Mon Sep 01, 2008 5:05 pm
I looked at the Edge and Warthog when I decided I was going to try out a tuber. For looks and easy build up I went with the Warthog. Seems to be a good build so far. I have not had time to get it on the rocks yet. If you make it to the comp Chad and I can put them side by side so you can see the differences. I don't know how well it will work yet but I guess we will see soon. 
ElkySS- OKRCRC Member
- Number of posts : 216
Age : 48
Location : Tulsa, OK
Registration date : 2008-06-28
tslabaugh- OKRCRC
- Number of posts : 42
Age : 37
Location : Oklahoma City
Registration date : 2008-06-26
Re: My Axial AX-10 Kit Build Thread
by w0ace Thu Sep 04, 2008 10:37 pm
Finally got some parts in today!!! Have the front and rear axels done, most of the frame together. Going to build the shocks tomorrow night, install the driveshafts, motor, and build my dig unit. Still no battery pack or ESC! Hopefully they will show up tomorrow! Maybe test run this weekend! FINALLY PROGRESS!!!!!!!!
w0ace- OKRCRC Member
- Number of posts : 53
Age : 50
Location : Tulsa, OK
Registration date : 2008-08-13
Re: My Axial AX-10 Kit Build Thread
by w0ace Sat Sep 06, 2008 9:26 pm
[img][/img]
Made some progress today. Added Hitec HS-645 for steering, Novak 55T motor, mounted 7 cell pack, got a new body and painted it. Now, if only my ESC would show up!!!! Was suppose to of been here last Thursday, still hasn't showed. I'm ready to roll when it shows up.
w0ace- OKRCRC Member
- Number of posts : 53
Age : 50
Location : Tulsa, OK
Registration date : 2008-08-13
Re: My Axial AX-10 Kit Build Thread
by DARKHORSE Sun Sep 07, 2008 2:15 pm
what esc are you waiting for ?
DARKHORSE- OKRCRC
- Number of posts : 609
Age : 48
Location : Oklahoma City
Registration date : 2008-06-25
Re: My Axial AX-10 Kit Build Thread
by w0ace Sun Sep 07, 2008 3:54 pm
Novak Rooster.....Somewhere lost in the mail now I guess, didn't show up yesterday either.....?
Just checked with Hobby Town, they only have the combo, but I already have a brand new Novak 55T, so I guess I'll be waiting......
Just checked with Hobby Town, they only have the combo, but I already have a brand new Novak 55T, so I guess I'll be waiting......
w0ace- OKRCRC Member
- Number of posts : 53
Age : 50
Location : Tulsa, OK
Registration date : 2008-08-13
On the ROCKS!!!!
by w0ace Sun Sep 07, 2008 4:21 pm
Just some pics, STILL no ESC!!! That's my rock pit in the center of my dirt track, its mainly all grass now. A work in progress.
w0ace- OKRCRC Member
- Number of posts : 53
Age : 50
Location : Tulsa, OK
Registration date : 2008-08-13
Re: My Axial AX-10 Kit Build Thread
by DARKHORSE Sun Sep 07, 2008 9:24 pm
Looks sweet, You gonna be at the comp next weekend?
DARKHORSE- OKRCRC
- Number of posts : 609
Age : 48
Location : Oklahoma City
Registration date : 2008-06-25
Re: My Axial AX-10 Kit Build Thread
by w0ace Sun Sep 07, 2008 9:49 pm
Planning on it. Still don't know for sure where its at, just Disney.....
w0ace- OKRCRC Member
- Number of posts : 53
Age : 50
Location : Tulsa, OK
Registration date : 2008-08-13
I'm crawling!!!!
by w0ace Mon Sep 08, 2008 9:04 pm
ESC finally came today I'm crawling on the rocks now
Already need a ton of upgrades.....Stonger servo, better radio with 3 channels that are USEABLE
for rear dig, have new rock claws on the way, need a BUG BODY! My new Losi Grappler stops on the hood everytime! Perfect flat spot to stop it on the way over 
I'm crawling on the rocks now Already need a ton of upgrades.....Stonger servo, better radio with 3 channels that are USEABLE
for rear dig, have new rock claws on the way, need a BUG BODY! My new Losi Grappler stops on the hood everytime! Perfect flat spot to stop it on the way over
w0ace- OKRCRC Member
- Number of posts : 53
Age : 50
Location : Tulsa, OK
Registration date : 2008-08-13
jbrentd- OKRCRC Member
- Number of posts : 63
Age : 50
Location : Owasso
Registration date : 2008-07-02
Re: My Axial AX-10 Kit Build Thread
by w0ace Tue Sep 09, 2008 5:35 pm
jbrentd wrote:don't turn over so much.
w0ace- OKRCRC Member
- Number of posts : 53
Age : 50
Location : Tulsa, OK
Registration date : 2008-08-13
Page 1 of 2 • 1, 2
Similar topics» Axial AX-10 Kit or ARTR? Which is better value?
» looking for a body for my axial scorpion
» Another AX 10 Build
» New Build
» 1.9 Trail doctors on axial Beadlocks
» looking for a body for my axial scorpion
» Another AX 10 Build
» New Build
» 1.9 Trail doctors on axial Beadlocks
Permissions in this forum:
You cannot reply to topics in this forum|
|
|
» Okrcrc 2013 comp# 1 Disney Oklahoma
» scale comp class
» 2012 Season
» Okrcrc Comp #5 of 2012
» Okrcrc Comp#4 Disney ok
» Happy Mother's DAY
» The Sons Comp Truck
» Romanose State Park