JP CUSTOM BODILESS BULLY
4 posters
JP CUSTOM BODILESS BULLY
getting started on my son Jarred's Bully, I'm using JP customs Hellstrom chassis with a JP cab.
I'm starting off building the chassis and building panels for the chassis. I've got a Jconcepts gate killer body to cut up.
I cut the top out of the gate killer body, I like the sun roof and the ridges it has down the back. I'm going to be using the sides of gate killer body for side panels.
I'm starting off building the chassis and building panels for the chassis. I've got a Jconcepts gate killer body to cut up.
I cut the top out of the gate killer body, I like the sun roof and the ridges it has down the back. I'm going to be using the sides of gate killer body for side panels.
RICKY AVERY- OKRCRC
- Number of posts : 59
Age : 64
Location : SILOAM SPRINGS ,AR
Registration date : 2009-11-19
Re: JP CUSTOM BODILESS BULLY
I got the lower and upper links put together today, I used the Traxxas 5525 rod ends, I like them ,they are long so I can cut them to get the size I want.
I like it, but I think I would do it a little different next time, Just a little.
I like it, but I think I would do it a little different next time, Just a little.
RICKY AVERY- OKRCRC
- Number of posts : 59
Age : 64
Location : SILOAM SPRINGS ,AR
Registration date : 2009-11-19
Re: JP CUSTOM BODILESS BULLY
IT looks even better in person
dustin keeler- OKRCRC
- Number of posts : 18
Age : 49
Location : NW Arkansas
Registration date : 2009-11-16
Re: JP CUSTOM BODILESS BULLY
Looking good Rick! My bully axles will be in next week. I can't wait.
procraft98- OKRCRC Member
- Number of posts : 133
Age : 43
Location : Broken Arrow, OK
Registration date : 2009-02-22
Thank you sponsors
It's a roller, I'm waiting on some eletronics to get this thing going.
RICKY AVERY- OKRCRC
- Number of posts : 59
Age : 64
Location : SILOAM SPRINGS ,AR
Registration date : 2009-11-19
Re: JP CUSTOM BODILESS BULLY
Awesome.........
dustin keeler- OKRCRC
- Number of posts : 18
Age : 49
Location : NW Arkansas
Registration date : 2009-11-16
Just Thanking my Sponsors
After I get one together all mocked up like I think I want it. I start over and tear it all apart.
The 1st thing I do is the gear cases, I get them all greased up.
I always use my favorite grease
I use a little blue locktite on everything.
Those bushings on the front knuckle can be fun to put in with them wanting to fall out before you get the screw in, so I put a little grease on them and they stick.
I'm using the RC4WD sterring kit ,it seems to work good on the other rig.
Got the front axle done and the motor mounted.
Back axles is on and shocks mounted.
It's a roller again, I'll get the electronics in as soon as I get them, they are on the way. I got a radio from bbyrd, ESC from JP customs and a punk dig.
I really like these Vanquish rims, I got 1inch wheels all the way around with 725 hubs in front and 600 hubs in the rear. Nova's 2 stage foams all the way around. I did cut a 1/4in off the inter foam in the front. After using them on Dave's bully I decided the front needed a little forward bite and that worked for his rig.
The 1st thing I do is the gear cases, I get them all greased up.
I always use my favorite grease
I use a little blue locktite on everything.
Those bushings on the front knuckle can be fun to put in with them wanting to fall out before you get the screw in, so I put a little grease on them and they stick.
I'm using the RC4WD sterring kit ,it seems to work good on the other rig.
Got the front axle done and the motor mounted.
Back axles is on and shocks mounted.
It's a roller again, I'll get the electronics in as soon as I get them, they are on the way. I got a radio from bbyrd, ESC from JP customs and a punk dig.
I really like these Vanquish rims, I got 1inch wheels all the way around with 725 hubs in front and 600 hubs in the rear. Nova's 2 stage foams all the way around. I did cut a 1/4in off the inter foam in the front. After using them on Dave's bully I decided the front needed a little forward bite and that worked for his rig.
RICKY AVERY- OKRCRC
- Number of posts : 59
Age : 64
Location : SILOAM SPRINGS ,AR
Registration date : 2009-11-19
Just Thanking my Sponsors
I made a tray for my Punk dig switch and receiver.
I put the new TorqueMaster BR-XL in the belly of the chassis.
I got the battery hanging on the front upper links.
Then I bolted the dig/receiver tray in the cab.
All I got to do now is get it on the rocks and dial it in.
I put the new TorqueMaster BR-XL in the belly of the chassis.
I got the battery hanging on the front upper links.
Then I bolted the dig/receiver tray in the cab.
All I got to do now is get it on the rocks and dial it in.
RICKY AVERY- OKRCRC
- Number of posts : 59
Age : 64
Location : SILOAM SPRINGS ,AR
Registration date : 2009-11-19
Just Thanking my Sponsors
I found this Duratrax motor guards and used some Associated chassis protective sheet to make a nice clean skid for the motor and axle housing. I just had to trim the motor guard a little and I made the chassis sheet overlap on the motor guard a little to help hold it in place along with some zip ties on the top. On the zip ties I ran it from hole to hole ,then I cut the head off another zip tie and put it on.
RICKY AVERY- OKRCRC
- Number of posts : 59
Age : 64
Location : SILOAM SPRINGS ,AR
Registration date : 2009-11-19
Similar topics
» Havoc Bully Warrior
» Dustin Keelers Bully
» Bully 2 Roller For sale
» Team Avery's Bully #3
» Berg axles or Bully Axles... that is the ??
» Dustin Keelers Bully
» Bully 2 Roller For sale
» Team Avery's Bully #3
» Berg axles or Bully Axles... that is the ??
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Mon Jan 21, 2013 11:11 pm by chad30w
» Okrcrc 2013 comp# 1 Disney Oklahoma
Mon Jan 21, 2013 11:11 pm by chad30w
» scale comp class
Fri Jun 29, 2012 8:46 pm by Gdirtbike
» 2012 Season
Fri Jun 29, 2012 8:42 pm by Gdirtbike
» Okrcrc Comp #5 of 2012
Mon May 14, 2012 6:38 pm by chad30w
» Okrcrc Comp#4 Disney ok
Sat May 12, 2012 10:53 pm by OKJeepin
» Happy Mother's DAY
Sat May 12, 2012 10:32 pm by OKJeepin
» The Sons Comp Truck
Fri Apr 06, 2012 3:11 pm by backroads
» Romanose State Park
Mon Mar 26, 2012 7:07 pm by backroads